LiMBO - Late Model Bus Organization, International

Technical forums => Technical Concerns => : deager July 01, 2008, 09:00:52 AM

: Replacement of dashboard
: deager July 01, 2008, 09:00:52 AM
I'm in the process of replacing the complete dash on our 1968 Westfalia. The bundle of wires for the ignition switch and turn signal switch pass through a circular hole in the dash.,and on their way to the steering column.  I'm looking for guidance on the best way to free the wires with out taking all the wires apart. I'm in deep enough with all the dash wires removed. Perhaps other members have run into the same problem
Thanks
SimplePortal 2.3.6 © 2008-2014, SimplePortal